This Tissue Paper Banner is put together using tissue paper to make tassels. Run them through twine and you have an adorable party banner!
I made this for Valentines but use any kind of tissue paper depending on the occasion. Use 2-3 different colors to really make the banner stand out.
Here’s what you will need:
Tissue paper in 2-3 colors
Ribbon or wire
Note: I used 2 sheets of tissue paper for each tassel. The silver tissue paper was a little thicker so I only used one sheet.
STEP 1: Fold 2 sheets of tissue paper in half and cut it into a square with the folded edge at the top. I cut my tissue paper about 9 inches in width.
STEP 2: Cut the tissue paper in strips about 1 inch, stopping about 1 inch from the top.
STEP 3: Unfold the tissue paper straightening out the strips.
STEP 4: Roll the tissue paper where the folded edge is in the center.
STEP 5: Straighten out the strips as you go so they don’t get tangled.
STEP 6: After you have folded it all the way to the end, fold it in half to create a loop.
STEP 7: Secure the loop with ribbon, twine, or wire.
STEP 8: Cut the ends to your desired length.
STEP 9: Run the loops through twine.